Introduction
A loud server can be a distraction, but quiet fans alone don’t make a rackmount build a good fit. The case also needs room for your graphics card, enough airflow for its heat output, and clearance for the rest of your components. This roundup covers two Rosewill 4U chassis, not graphics cards or complete servers, so you’ll still need to select a compatible GPU, power supply, motherboard, and storage.
The best quiet rackmount gpu server setup depends on more than a fan count. A GPU’s dimensions and power connectors need to match the chassis and power supply, while airflow must support both the card and installed drives. The listed Rosewill cases support ATX and CEB motherboards and provide seven PCI expansion slots, but the supplied details don’t specify maximum GPU length, cooler thickness, or power supply clearance. Check those measurements against your chosen hardware before ordering. This careful spec check can help avoid poor fit, restricted cooling, and last-minute build changes.
The RSV-R4000U stands out for its eight internal 3.5-inch bays, three 5.25-inch device spaces, and four pre-installed fans. The RSV-R4100U costs less in the listed pricing and has seven 3.5-inch bays with three fans, but its drive mounting has a specific screw-hole requirement. Neither product listing provides measured noise levels, so treat “quiet” as a stated design aim, not a guaranteed acoustic result. Use the product details below to compare capacity, cooling layout, and front-panel features before deciding.
FAQs
Are these Rosewill cases graphics cards or complete GPU servers?
No, both are 4U rackmount chassis. You must supply the GPU, motherboard, processor, memory, storage, and power supply, then confirm component compatibility before assembly.
Which Rosewill chassis has more storage bays?
The RSV-R4000U has eight internal 3.5-inch bays and space for three 5.25-inch devices. The RSV-R4100U has seven internal 3.5-inch bays and space for two 5.25-inch devices, making the first model the higher-capacity option on the listed specifications.
Will a long, triple-slot GPU fit either 4U case?
The provided specifications don’t state maximum GPU length or cooler thickness, so fit cannot be confirmed from the listing details alone. Check the card dimensions, slot clearance, motherboard layout, and any drive cage interference before purchase.
Which case has more pre-installed cooling fans?
The RSV-R4000U includes four fans: two front 120mm PWM fans and two rear 80mm fans. The RSV-R4100U includes three: one front 120mm PWM fan and two rear 80mm PWM fans; neither listing provides a measured noise rating.
Does the RSV-R4100U support every 3.5-inch hard drive?
No, its product details specify drives with three screw holes on each side for mounting and say drives with two screw holes on each side aren’t supported. Check your drive’s side-hole pattern before choosing this chassis.
What should I check before installing a GPU in a rackmount server?
Confirm the GPU’s length, height, slot thickness, power connectors, and manufacturer-recommended PSU requirements against the full build. Also plan airflow around the GPU and drives, and verify the case’s component clearances with the manufacturer because those dimensions aren’t provided here.
Write Your Review
No reviews yet. Be the first to share your experience!